StackPower is a feature that allows the power supplies to share the load across multiple devices in a stack. Switch_6 P1 connects to switch_1 P2 (Brown cable)īelow the steps that show how to cable the stack for power-stack configuration: Switch_5 P1 connects to switch_6 P2 (Yellow cable) Switch_4 P1 connects to switch_5 P2 (Violet cable) Switch_3 P1 connects to switch_4 P2 (Purple cable) Switch_2 P1 connects to switch_3 P2 ( Orange cable) Switch_1 P1 connects to switch_2 P2 (Green cable) Note: The process will be similar for stacks of 2,3,4,5,7,8 and 9 switches.Įach switch has two stack-wise ports(left), let's name the stack wise ports P1 and P2 as shown in the picture. The example below, shows how to properly connect a stack of six 3850 switches, together with a power-stack connection example. Be aware that cables for the 3750 platform do not work on the 3850 platform. The right type of cables must be used to achive stack completion. The same mode must be used on all the switches INSTALL or BUNDLE mode. (Software auto upgrade can be configure on a existing stack in order to automatically upgrade newly added switches). The IOS version used must be the same for all switches. In order to be able to form a switch stack more than 2 switches must be used. It also shows the use of some commands that will help to troubleshoot why a stack is not forming properly. This document describes the process to properly form a stack-wise and power stack with Cisco Catalyst 3850 switches. How to Form a Catalyst 3850 Data-Stack and Power-Stack Introduction
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |